Kicker 11 IX1000.1 1-Channel IX Mono Amplifier

Kicker 11 IX1000.1 1-Channel IX Mono Amplifier Review

1 Channel IX Series Mono Amplifier, 1000 watts RMS x 1 channel at 2 ohm, Signal to noise: 95dB, Compact footprint, Class D Design, KICKEQ™ Bass Boost, Differential inputs, Bass remote control

Legacy LA120 2 Channel 240 Watt Amplifier

Legacy LA120 2 Channel 240 Watt Amplifier Review

Legacy LA120 2 Channel 240 Watt Amplifier Feature

• 240 Watts Total Output Power (120 Watts x 2 Channels)
• 3-Way Protection (Short/Thermal/Overload)
• Heavy Duty Aluminum Alloy Heatsink
• Variable Gain Control
• High/Low Level Input

Legacy LA120 2 Channel 240 Watt Amplifier

Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote

Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote Review

Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote Feature

• Monoblock Phantom amplifier with Class D power supply
• Delivers 5000 Watts at 1 ohm; 3500 Watts at 2 ohms; 1800 Watts at 4 ohms
• Line and speaker level inputs with variable gain control
• Low-pass variable crossover; 18dB bass boost
• Includes remote sub control

New for 2010, Boss Audio's Phantom power amplifiers cover a wide variety of applications. Four- and two-channel full-range models will match perfectly with your speaker system. MOSFET amplifiers deliver plenty of power, while bass boost and built-in high- and low-pass crossovers allow you to customize your cabin acoustics to your taste. For the ultimate in power, Boss offers Class D monoblock amplifiers like the PH5000D.

A Class D monoblock amp with 5000 watts peak power. Click to enlarge.

Phantom amps include a remote subwoofer level control.

Remote Subwoofer Level Control
Phantom amps include a remote subwoofer level control for easy level adjustments.

Subsonic Filter
Trim the signal of unusable bass--below human hearing range and taxing to audio systems--for further efficiency with the Subsonic filter.

Variable Phase Shift Control
Allows you to change the output phase from 0 to 180 degrees to help compensate for the timing difference between drivers.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the amplifier can handle high-level signals from receivers lacking RCA outputs.

Variable Low-Pass Crossover
Keep high frequencies from your sub with a variable crossover.

Variable Gain Control
Allows you to match the input gain to your receiver for better sound with less distortion.

Class D Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

Strapping Capability
Strap two amps together for twice the power.

What's in the Box
Boss PH5000D Amplifier, Subwoofer Level Control, User's Manual Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote

Rockford Fosgate Prime R500-1 500-Watt Mono Amplifier

Rockford Fosgate Prime R500-1 500-Watt Mono Amplifier Review

Rockford Fosgate Prime R500-1 500-Watt Mono Amplifier Feature

• Mono amplifier delivers 500 watts at 2 ohms, 350 watts at 4 ohms
• Variable low pass crossover with 12dB/octave slope and 40Hz to 130Hz crossover point
• Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz
• RCA inputs for signal level input and pass-through jacks for system building
• The input gain control is preset to match the output of most source units

Rockford Fosgate amplification at an unbelievable value. The R500-1 mono amplifier pumps out 500 watts into a 2-ohm load, perfect for a pair of R1S410 10" or R1S412 12" woofers.

Rockford Fosgate Prime Series Amplification A new generation of performance geared toward the "novice" car audio enthusiast or first time buyer. The Prime series amplifiers feature legendary Rockford Fosgate power, controls, and functions while fitting into any budget. Now more than ever, it's easy to get Rockford Fosgate amplifier DNA into your car audio system.

---

Rockford Fosgate amplification at an unbelievable value. Click to enlarge.

RCA inputs and pass-through jacks. Click to enlarge.

R500-1 Features

Power and Protect LEDs
The Protect LED illuminates if a short circuit or to low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.

RCA Input Jacks
The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist the signal degradation caused by corrosion.

RCA Pass-Thru Jacks
This Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location.

Gain Control
The input gain control is preset to match the output of most source units.

Phase Switch
Allows you to select the output phase of the amplifier between 0 degrees and 180 degrees.

Variable Low Pass Crossover
Determine which frequencies you feed your subs with the built-in 12dB/octave Butterworth filter, with a crossover point variable from 40Hz to 130Hz.

Punch Bass
This is an adjustable Bass level control centered at 45Hz @ 12dB/octave.

Remote Punch Level Control
When connected, the "Gain Control" is linked and allows you to remotely control the output level of the amplifier from the dash or center console.

---

R500-1 Specifications

Number of Channels:	1
Rated Power:	320 Watts RMS x 1 @ 4-Ohms 500 Watts RMS x 1 @ 2-Ohms
Total Power:	500 Watts
Dynamic Power:	n/a
Bridgeable:	No
Efficiency (average):	66.7% @ 4-Ohm 58% @ 2-Ohm
Crossover Controls:	Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Tone Controls:	Punch Bass: 0dB to +12dB @ 45Hz
Signal Input:	Low Level: 1 RCA pair
Signal Output:	Low Level: 1 RCA pair
Power Input Connector:	Screw terminal barrier strip
Power Wire Gauge:	4 AWG
Speaker Output Connector:	Screw terminal barrier strip
Speaker Wire Gauge:	8 AWG
Heat Sink Type:	Extruded aluminum
Cooling:	Convection
Remote Controls:	Punch Level Control (when connected, is linked to "gain control" to provide remote output level)
Visual Indicators:	Power Protect
Circuit Topology Class:	Class A/B
Frequency Response:	20Hz to 20kHz +/- 1dB
Shipping Weight:	TBA
Dimensions (HxWxL):	2.40 x 7.67 x 16.65 (in) 6.10 x 19.49 x 42.30 (cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier, User's Manual

---

Need More Amp?

Step up to the Punch Series P500-1bd or the Power Series T500-1BDCP for more advanced multi-channel amps, or check out the many other Rockford options.

---

Rockford Fosgate Prime Series Amplification

Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier	Rockford Fosgate Prime R300-4 300 Watt Multi Channel Amplifier	Rockford Fosgate Prime R250-1 250 Watt Mono Amplifier	Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier	Rockford Fosgate Prime R1000-1D 1000 Watt Mono Amplifier

Rockford Fosgate Prime 500 Watt Mono amplifer with on-board adjustable crossover, gain control. Amplifier features unregulated power supply, and and remote Punch bass level control. CEA Certified RMS Power Rating 320 watts x1 @ 4 Ohms, 500 watts x1 @ 2 Ohms. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Rockford Fosgate Prime R300-4 300-Watt Multi-Channel Amplifier

Rockford Fosgate Prime R300-4 300-Watt Multi-Channel Amplifier Review

Rockford Fosgate Prime R300-4 300-Watt Multi-Channel Amplifier Feature

• Four-channel amplifier delivers 75 watts at 2 ohms, 50 watts at 4 ohms, 150 watts at 4 ohms bridged mono
• Selectable high-pass crossover at 80Hz or variable low pass crossover at 50Hz-250Hz, both with 12dB/octave slope
• Punch Bass adjustable bass level control of 0dB/+6dB/+12dB centered at 45Hz
• RCA inputs for signal level input and pass-through jacks for system building
• The input gain control is preset to match the output of most source units

Rockford Fosgate amplification at an unbelievable value. The R300-4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done.

Rockford Fosgate Prime Series Amplification A new generation of performance geared toward the "novice" car audio enthusiast or first time buyer. The Prime series amplifiers feature legendary Rockford Fosgate power, controls, and functions while fitting into any budget. Now more than ever, it's easy to get Rockford Fosgate amplifier DNA into your car audio system.

---

Rockford Fosgate amplification at an unbelievable value. Click to enlarge.

RCA inputs and pass-through jacks. Click to enlarge.

R300-4 Features

Power and Protect LEDs
The Protect LED illuminates if a short circuit or to low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.

RCA Input Jacks
The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist the signal degradation caused by corrosion.

Gain Control
The input gain control is preset to match the output of most source units.

Crossover Switch
Selectable switch for 80Hz High-Pass (HP), All Pass (AP), or Low-Pass (LP) operation.

Variable Crossover (Low Pass Only)
A built-in 12dB/octave Butterworth filter with a crossover point variable from 50Hz to 250Hz.

Punch Bass
The Punch Bass control provides a bass boost up to 12dB @ 45Hz. Adjustable between 0dB, +6dB and +12dB.

---

R300-4 Specifications

Number of Channels:	4
Rated Power:	50 Watts RMS x 4 @ 4-Ohms 75 Watts RMS x 4 @ 2-Ohms 150 Watts RMS x 2 @ 4-Ohms Bridged/Mon
Total Power:	300 Watts
Dynamic Power:	Front Channels: 62 Watts x 2 @ 4-Ohms 0 degrees Res 98 Watts x 2 @ 2-Ohms 0 degrees Res Front Channels: 61 Watts x 2 @ 4-Ohms 0 degrees Res 89 Watts x 2 @ 2-Ohms 0 degrees Res
Bridgeable:	Yes
Efficiency (average):	59% @ 4-Ohm 49% @ 2-Ohm
Crossover Controls:	Front Channels High-Pass (HP): 80Hz @ 12dB/octave Butterworth Low-Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth Rear Channels High-Pass (HP): 80Hz @ 12dB/octave Butterworth Low-Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth
Tone Controls:	Front Channels Punch Bass: 0dB/+6dB/+12dB @ 45Hz Rear Channels Punch Bass: 0dB/+6dB/+12dB @ 45Hz Function works when crossover in (LP) position
Signal Input:	Low Level: 2 RCA pair
Signal Output:	n/a
Power Input Connector:	Screw terminal barrier strip
Power Wire Gauge:	4 AWG
Speaker Output Connector:	Screw terminal barrier strip
Speaker Wire Gauge:	8 AWG
Heat Sink Type:	Extruded aluminum
Cooling:	Convection
Remote Controls:	n/a
Visual Indicators:	Power Protect
Circuit Topology Class:	Class A/B
Frequency Response:	20Hz to 20kHz +/- 1dB
Shipping Weight:	TBA
Dimensions (HxWxL):	2.40 x 7.67 x 17.09 (in) 6.10 x 19.49 x 43.40 (cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R300-4 150 Watt Stereo Amplifier, User's Manual

---

Need More Amp?

Step up to the Punch Series P400-4 or the Power Series T400-4 (both 400-watt multi-channel amps) or check out the many other Rockford options.

---

Rockford Fosgate Prime Series Amplification

Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier	Rockford Fosgate Prime R300-4 300 Watt Multi Channel Amplifier	Rockford Fosgate Prime R250-1 250 Watt Mono Amplifier	Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier	Rockford Fosgate Prime R1000-1D 1000 Watt Mono Amplifier

Rockford Fosgate Prime 300 Watt Multi-channel amplifer with on-board adjustable crossover, gain control. Amplifier features unregulated power supply, and on board Punch bass. CEA Certified RMS Power Rating 50 watts x4 @ 4 Ohms, 75 watts x4 @ 2 Ohms, 150 watts x2 @ 4 Ohms Briged. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Boss AR1200.2 ARMOR 2-Channel 1200-Watt Mosfet Amplifier

Boss AR1200.2 ARMOR 2-Channel 1200-Watt Mosfet Amplifier Review

Boss AR1200.2 ARMOR 2-Channel 1200-Watt Mosfet Amplifier Feature

• 2-Channel MOSFET Bridgeable Power Amplifier
• Remote Subwoofer Level Control Included
• 600W x 2 Max Power
• 230W x 2 RMS Power
• 1200W x 1 Max Bridged Power

Why sacrifice performance for the sake of convenience? with a slimmer chassis, ARMOR is the perfect amplifier when space is limited, and power is required. Indeed, this combination of feature-rich performance and put-it-anywhere convenience is hard to find in the automotive environment; so much so that the ARMOR may well be forging its own product category.

Lanzar HTG237 1000 Watt 2-Channel Mosfet Amplifier

Lanzar HTG237 1000 Watt 2-Channel Mosfet Amplifier Review

Lanzar HTG237 1000 Watt 2-Channel Mosfet Amplifier Feature

• 2 x 125W RMS @ 4 OHMS - Bass Boost Circuit - Low Pass Filter Controls - S/N Ratio: >90dB - Subwoofer Remote Level Control
• 2 x 500W Max @ 4 OHMS - Bridgeable at 4 Ohms - High Pass Filter Controls - Channel Separation: >65dB - Fuse: 25A x 1
• 1 x 1000W Max @ 4 OHMS Bridged - 2 Ohm Stereo Stable - Power and Protection LED Indicators -
• 2 x 225W RMS @ 2 OHMS - Gold RCA Inputs - Soft Turn-on/Turn-off - HPF Freq. Response: 80KHz
• Electronic Crossover Network - Line Outs for Left and Right Channel - THD: <0.01%. -
• Freq. Response: 10Hz~45KHz - Dimensions: 9.84''(L) x 2.24''(H) x 8.81''(W)
• LPF Freq. Response: 50Hz-250Hz

If you're looking for both quality and power, this dynamic 1000-watt, 2-channel MOSFET amplifier is it. Versatile and powerful, this high-performance amp provides depth and feeling to your music. You'll be amazed at the clarity and richness of the bass this amp produces with its state-of-the-art bass boost circuit. Perfect for competitions, this affordable and durable amp provides a rich sound at all volumes, and is easy to configure yourself. The HTG237 is equipped with safety and security features, including LED indicators and advanced protection circuitry. Blow the competitors away with an elite amplifier that's one of Lanzar's top-sellers - and for good reason. The MOSFET pulse width modulation power supply pumps a clean, distortion-free signal to your speakers The unit also includes a bass-boost remote, low- and high-pass filters, and tons of other great features. This amp is made to last, and once you upgrade your system with a Lanzar amplifier, you'll wonder how you ever lived with low-resolution sound before.

Kenwood KAC-1502S Stereo / Bridgeable 350 Watts 2 Channel Car Power Amplifier

Kenwood KAC-1502S Stereo / Bridgeable 350 Watts 2 Channel Car Power Amplifier Review

Kenwood KAC-1502S Stereo / Bridgeable 350 Watts 2 Channel Car Power Amplifier Feature

• 2-Channel Class A/B Car Amplifier // Max power output: 175 watts x 2 chan. // MOSFET switching power supply
• RMS Power Rating: 4 ohms: 60 watts x 2 chan. // 2 ohms: 75 watts x 2 chan. // Bridged, 4 ohms: 150 watts x 1 chan.
• LED power indicator // Speaker-level inputs // Short circuit, DC offset, overload, and thermal protection circuitry
• Cast aluminum heat sink design // RCA level inputs // Screw terminals // Fixed low-pass filter (80 Hz)
• CEA-2006 compliant amplifier // Frequency response: 5-50,000 Hz // Dimensio // ns: 8-7/8"W x 2-3/16"H x 7-1/16"D

KAC-1502S 350-Watts 2-Channel Power Stereo Amplifier

Pyramid PB1617X 2000 Watt 4 Channel Bridgeable Mosfet Amplifier

Pyramid PB1617X 2000 Watt 4 Channel Bridgeable Mosfet Amplifier Review

Pyramid PB1617X 2000 Watt 4 Channel Bridgeable Mosfet Amplifier Feature

• 2000 Watts Total System Power Output
• MOSFET Pulse Width Modulated Power Supply
• Built-In Variable Low/High/Subwoofer Crossover
• Low Level Inputs/Output
• 2 Ohm Stereo Stable

Pyramid PB1617X 2000 Watt 4 Channel Bridgeable Mosfet Amplifier

Stinger Spp925 925-Amplifier Battery with Metal Case

Stinger Spp925 925-Amplifier Battery with Metal Case Review

Stinger Spp925 925-Amplifier Battery with Metal Case Feature

• This item is not for sale in Catalina Island

Stinger Spp925 925-Amp Battery With Metal Case

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Review

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Feature

• 700 Watts x 2 Output Slim Size Amplifier Design For Easy Installation
• Variable Hi/Lo Electronic Crossover Network
• Gold Plated RCA Inputs Outputs
• Power And Protection LED Indicators
• 1400 watts x 1 Bridged Output

Amazon.com Product Description The Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier extends the Pyle tradition into a totally new series of amp, designed from the ground up to deliver the power, performance, and flexibility the modern car enthusiast demands.

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.

High-end performance at an affordable price. Click to enlarge.

Click to view features and controls.

Bass Boost Level Control
Permits adjustment of the bass level up to an increase of approximately up to 18dB.

Crossover Mode Selector
When used with normal, full range system, set this switch to "Full". If you wish to use the internal crossover to power a driver or specific frequency range, use the "LPF" or HPF" for the "Low Pass" or "High Pass" settings.

Input Level Controls
Enables the matching of levels to the output levels from the head unit (or other original source). The input sensitivity of adjustment ranges from 6V to 200mV.

Sub Sonic Control
When the sub sonic selector switch is in "On" mode, this filter control permits continuously variable adjustment from 10 to 100Hz.

Aux Line Outs
This amp features gold plated RCA Jacks for Aux line outputs. Use these outputs for unlimited systems expansion. Power Terminals
These connectors will deliver power, ground, and remote turn-on control to the amplifier.

Speaker Terminals
These terminals are 14K gold plated to guarantee high conductivity and minimum signal

Features include:

• Variable Hi/Lo Electronic Crossover Network
• Variable Input Level (Gain) Control
• Switchable Bass Boost
• Power and Protection LED Indicators
• Low Level Inputs
• Gold Plated RCA Inputs and Outputs
• Slim Size Amplifier Design For Easy Installation
• Thermal / Overload / Short Circuit Protection
• Anti-Thump Turn-on
• Soft Turn-On Circuit
• Remote Turn On/Off

What's in the Box
Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier, manual The Pyle Chopper series has been specially designed from the bottom up to provide quality sound in a sturdy form factor. You’ll be blasting your tunes and rocking the block with these amps. The PLA2200 is a two-channel, 1400-watt bridgeable power amplifier. It’s equipped with everything you’ve come to expect from quality car amplifiers – switchable bass boost, variable gain control, and a configurable electronic crossover network. The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. And this amp’s slim size makes installation a breeze – you’ll have no trouble finding a spot for this powerful little device. So chop up your tunes and play them for the world with the Pyle Chopper.