AUDIOPIPE AP15001D 1500W MONO D Car Audio Amplifier

AUDIOPIPE AP15001D 1500W MONO D Car Audio Amplifier Review

AUDIOPIPE AP15001D 1500W MONO D Car Audio Amplifier Feature

• 600 x 1 RMS @ 4 Ohm, 950 x 1 RMS @ 2 Ohm, 1500 x 1 RMS @ 1 Ohm
• 1 Ohm load stable, Input level: 0.2-5v, Bass boost frequency: 30-80h
• Built In Variable 12 dB/ Octave Crossover, Low pass filter: 40-180hz,Subsonic filter: 5-50hz
• Bass Boost 0-12dB, Distortions: <0.2% thd, Signal to noise ratio: 70db
• Dimensions (WxHxL) 7" x 2.5" x 16"

BRAND NEW AUDIOPIPE PROFESSIONAL 1500 Watt Mono Car Amplifier has a remote bass control included!.

PYLE PLMRA120 240-Watt 2-Channel Waterproof Marine/Car Amplifier

PYLE PLMRA120 240-Watt 2-Channel Waterproof Marine/Car Amplifier Review

PYLE PLMRA120 240-Watt 2-Channel Waterproof Marine/Car Amplifier Feature

• PYLE PLMRA120 2-Channel Waterproof Marine/Car Amplifier
• 240 Watts Output Power (120 Watts x 2 Channels)
• Heavy Duty Aluminum Alloy Heatsink
• Gold Plated Speaker Terminals & Low Level RCA Inputs - High Level Inputs
• Full Manufacturer's 1 Year Warranty

This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool--it's completely waterproof. This 2-channel, 240-watt marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Remote turn/on off makes controlling the amp a breeze, and gold-plated RCA inputs mean it won't be a weak link in your setup.

Power your speakers on the dock, in your boat, or by the pool. Click here for a larger image

View a connection diagram. Click here for a larger image

Input Options

The PLMRA120 features low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.

Input Level Control

Adjust the line level input for the least amount of distortion to match your source unit.

Protection

Protect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. A heavy duty aluminum alloy heatsink helps prevent any thermal issues.

4 or 8 Ohm Speaker Impedance

The PLMRA120 is ready for either 4- or 8-ohm speakers, in pair.

Remote Turn-On/Off

Wire the PLMRA120 to turn on and off in tandem with your receiver/head unit.

Pyle PLMRA120 Select Specifications

Power Rating:	120 Watts x 2 Maximum (70 Watts x 2 RMS)
T.H.D:	0.05%
S/N Ratio:	> 80dB
Power Supply Voltage:	12V DC Neg. Ground (11-16V)
Frequency Response:	20 Hz-30 KHz
Input Impedance:	Low Level: 10K Ohms High Level: 100 Ohms
Input Sensitivity:	Low Level: 300mV High Level: 3V
Dimensions:	7.87 x 2 x 5.2 Inches (L x W x H)

What's in the Box

Pyle PLMRA120 Amplifier, Mounting Hardware, User's Manual

Pyle Marine 2 channel 240W amplifier

Lanzar VCT2010 800-Watt 2-Channel High-Power Mosfet Amplifier

Lanzar VCT2010 800-Watt 2-Channel High-Power Mosfet Amplifier Review

400W x 2 Output at 4 Ohms 800W x 1 bridged Output at 2 Ohms 2 Ohm Stable MOSFET Power Supply Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass : 40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Switch:0-18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x20 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x 1.78''H x 7.48''L

Pyle PLA4478 4 Ch 4000 Watts Bridgeable Mosfet Amplifier

Pyle PLA4478 4 Ch 4000 Watts Bridgeable Mosfet Amplifier Review

Pyle PLA4478 4 Ch 4000 Watts Bridgeable Mosfet Amplifier Feature

• Custom Terminal Block for Speaker Connection Thermal / Overload / Short Circuit Protection
• Input Impedance: 47K Ohms Soft Turn On/ Off Advanced Protection Circuitry S/N Ratio: >90dB Dimensions:10.24''W x 2.21''H x 17.72''L

When power isn’t enough, you need Pyle Power. This four-channel, 4000-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Power.

Power Acoustik OVN2-600 2-Channel Class A/B Amplifier

Power Acoustik OVN2-600 2-Channel Class A/B Amplifier Review

Power Acoustik OVN2-600 2-Channel Class A/B Amplifier Feature

• 120 x 2 watts @ 2-Ohm extruded alluminum heatsink
• No dash mounted bass control
• 4 ~ 250hz. Low-pass
• 4-~250hz. Hi-pass
• 200mv. ~ 8 volts input

Power Acoustik OVN2-600 2-Channel Class A/B Amplifier

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier Review

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier Feature

• MAX POWER, 1 OHM, N/A; MAX POWER, 2 OHM 1100w x 1; RMS POWER, 4 OHM 250w x 1; MAX BRIDGED POWER, 4 OHM N/A
• SIGNAL-TO-NOISE RATIO, > 105 dB; THD, 0.01%
• DIMENSIONS: 11-7/8-InchW x 2-5/8-InchH x 10-9/16-InchL
• Remote subwoofer level control; Line and speaker level inputs; Variable gain control; Input sensitivity selector
• Variable lowpass crossover; Power and protection LEDs; 0-+18dB selectable bass boost; MOSFET power supply

CHAOS EXXTREME 1100 Watts, Monoblock MOSFET Power Amplifier

Sound Storm Laboratories F4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover

Sound Storm Laboratories F4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover Review

Sound Storm Laboratories F4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover Feature

• Low pass crossover on CH3/4: 120Hz (fixed, 120Hz)
• Variable input gain control
• Power and protection LED indicators
• Line and speaker level inputs
• Chrome plated RCA connectors and screw terminals
• Max power 2 ohm 100W X 4
• RMS power 4 ohm 50W X 4

400W 4Channel Mosfet

Pyramid PB70 150 Watt Power Amplifier/Booster

Pyramid PB70 150 Watt Power Amplifier/Booster Review

Pyramid PB70 150 Watt Power Amplifier/Booster Feature

• Power On/Off Bypass Switch
• LED Indicator
• 150 Watts Amplifier
• Rotary Bass/Treble Control
• Built-in Heavy Duty Heatsink

75 Watts x 2 Channel OutputTransformerless Direct Coupled idge Type Amplifier/Booster Sleek Compact Design Rotary Bass Treble Control Power On/Bypass Switch Power On LED Indicator For 12VDC Negative Ground Systems Can Be Mounted Under Dash Connects Between Car Radio Speakers Easy Installation Accepts High or Low Impedance Inputs Gold Plated RCA Jacks Built-in Heavy Duty Heatsink Dimensions: 4.5-Inch W x 1.75-Inch H x 6.65-Inch L

Pyramid PBIN3 1000 Watt 20 Feet Amplifier Installation Wiring Kit

Pyramid PBIN3 1000 Watt 20 Feet Amplifier Installation Wiring Kit Review

Pyramid PBIN3 1000 Watt 20 Feet Amplifier Installation Wiring Kit Feature

• 20ft 8 Gauge Red Power Wire
• 4ft 8 Gauge Black Ground Wire
• 17ft Right Angle RCA Interconnect Audio Cable
• 3ft Black Split Loom Cable Conduit
• 60A MAXI Type Nickel Plated Fuse

20ft 8 Gauge Red Power Wire4ft 8 Gauge Black Ground Wire 17ft Right Angle RCA Interconnect Audio Cable 3ft Black Split Loom Cable Conduit 60A MAXI Type Nickel Plated Fuse MAXI In-line Fuse Holder 2 Ring Terminals: 8 G 2 Spade Terminals: 8 G 2 Butt Connectors 10 Cable Ties

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier Review

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier Feature

• 1000 Watts Total System Power Output
• MOSFET Pulse Width Modulated Power Supply
• Built-In Variable Low/High/Subwoofer Crossover
• High/Low Level Input
• 2 Ohm Stereo Stable

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Solid car audio without the huge price tag. Click to enlarge.

View output diagram.

View input diagram.

Bridgeable
Delivers two channels or bridge mono for subwoofers. The PB171X cranks out 2 x 50 watts RMS at 4 ohms and is 2-ohm stereo stable for 75 watts x 2.

Selectable Crossover Modes
The built-in crossover can be set to full for normal full-range systems, or low-pass/high-pass for delivering specific frequencies to components or subwoofers. Low-pass and high-pass frequency controls are provided for setting the crossover frequencies.

Input Versatility
The PB717X includes both high-level and low-level inputs, so you're covered with the various types of car stereos. The high-level inputs take direct speaker wire leads, while the low-level use RCA plugs.

To further match the amplifier to your receiver/head unit, a variable input level control is provided to dial in the perfect setting without distortion.

Bass Boost
Subwoofer fans rejoice: The PB717X features a bass boost of up to 18 dB, for added rumble.

MOSFET Power
The MOSFET pulse width modulated power supply helps provide excellent sound quality, minimal distortion, and efficient power handling.

Comprehensive Protection
High-performance audio requires a lot of power, and things can get hot quickly. Like any solid car amplifier, the PB717X features protective circuits. Overload and thermal indicators let you know they've activated and shut off the amp. In the event of a short circuit, power protection is provided in the form of easily replaceable fuses.

PB717X Specs

RMS power @ 4 ohms:	50 watts x 2
RMS power @ 2 ohms:	75 watts x 2
Maximum power output:	500 watts x 2
Input impedance/sensitivity (low-level):	10k ohms / 200 mV
Input impedance/sensitivity (high-level):	100 ohms / 5V
Signal/Noise ratio:	90 dB
THD:	Less than 0.04%
Frequency response:	15-30 kHz
Dimensions:	9.84 x 10.03 x 1.96 inches (L x W x H)
Power supply voltage:	14.4V DC negative ground
Maximum current draw:	30A

What's in the Box

Pyramid PB717X power amplifier and user's manual.

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

JBL MA6004 4-Channel Full-Range Marine Amplifier

JBL MA6004 4-Channel Full-Range Marine Amplifier Review

JBL MA6004 4-Channel Full-Range Marine Amplifier Feature

• Marinized circuit board
• Stainless-steel hardware
• Variable bass boost
• 12dB built-in variable electronic crossover
• 60W RMS x 4 channels at 4 ohms and 1% THD + N

JBL 4-Channel Full-Range Marine Amplifier

Rockford Fosgate R250-1 250 Watt RMS Mono Car Amplifier

Rockford Fosgate R250-1 250 Watt RMS Mono Car Amplifier Review

Rockford Fosgate R250-1 250 Watt RMS Mono Car Amplifier Feature

• PRIME Series Single-Channel Monoblock Class A/B Car Amplifier
• 8 Gauge power/ground connections with built-in ATC fusing
• Power and protection LED indicators
• RCA level inputs
• CEA-2006 compliant amplifier

Brand New ROCKFORD FOSGATE R250-1 250 Watt RMS Mono Car Amplifier Features: PRIME Series Single-Channel Monoblock Class A/B Car Amplifier 12dB/octave crossover 8 Gauge power/ground connections with built-in ATC fusing MOSFET power supply Power and protection LED indicators Single-channel operation 1 Pair of Preamp RCA outputs Heavy duty extruded aluminum alloy heatsink for optimal heat dissipation RCA level inputs Screw terminals CEA-2006 compliant amplifier

Lanzar VCT4110 2,000-Watt 4-Channel High-Power Mosfet Amplifier

Lanzar VCT4110 2,000-Watt 4-Channel High-Power Mosfet Amplifier Review

Lanzar VCT4110 2,000-Watt 4-Channel High-Power Mosfet Amplifier Feature

• 5 Position Electronic Adjustable Panel
• 16 - 9 Wide Screen
• Full Function OSD Touch Screen
• High Resolution and High Definition Picture capability
• DVD/SVCD/VCD/CD/CDR/CDR/RW Player Built-In ESP (Electronic Shock Protection)

500W x 4 Output at 4 Ohms1000W x 2 bridged Output at 2 Ohms 2 Ohm Stable MOSFET Power Supply Variable Hi-Pass:40 Hz-250 Hz Variable Low-Pass : 40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Switch:0-18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x30 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x1.78''H x 14.02''L

Soundstream RUB4.600 100 x 4 4-Channel Amplifier (Midnight Blue)

Soundstream RUB4.600 100 x 4 4-Channel Amplifier (Midnight Blue) Review

Soundstream RUB4.600 100 x 4 4-Channel Amplifier (Midnight Blue) Feature

• Midnight Blue Finish w/ Brushed Accents
• MOSFET Pulse Width Modulated Power Supply
• Three-Way Protection Circuitry (thermal short impedance)
• Tri-Mode Capable Variable Crossovers(HPF/Full/LPF/Band) Variable Bass Boost
• High Level Input Direct Wire 4 ga. Power 8 ga. Speaker Terminals

Rubicon Series 4 Channel Class A-B Amplifier - 600 Watts

Kenwood KAC-5204 350 Watt Max Power Stereo Amplifier with Variable LPF

Kenwood KAC-5204 350 Watt Max Power Stereo Amplifier with Variable LPF Review

Kenwood KAC-5204 350 Watt Max Power Stereo Amplifier with Variable LPF Feature

• Power stereo amplifier capable of bridging
• Features variable low pass filter, 350W Max Power
• Capable of bridging
• Variable low pass filter
• 350W Max Power

Power stereo amplifier capable of bridging, featuring variable low pass filter, 350W Max Power