Boss AR2600.2 ARMOR 2-Channel 2600 Watt Mosfet Amplifier

Boss AR2600.2 ARMOR 2-Channel 2600 Watt Mosfet Amplifier Review

Boss AR2600.2 ARMOR 2-Channel 2600 Watt Mosfet Amplifier Feature

• 2-Channel MOSFET Bridgeable Power Amplifier
• Remote Subwoofer Level Control Included
• 1300W x 2 Max Power
• 400W x 2 RMS Power
• 2600W x 1 Max Bridged Power

Why sacrifice performance for the sake of convenience? with a slimmer chassis, ARMOR is the perfect amplifier when space is limited, and power is required. Indeed, this combination of feature-rich performance and put-it-anywhere convenience is hard to find in the automotive environment; so much so that the ARMOR may well be forging its own product category.

Pyle PLA4988 4 Channel 6000 Watts Bridgeable Mosfet Amplifier

Pyle PLA4988 4 Channel 6000 Watts Bridgeable Mosfet Amplifier Review

Pyle PLA4988 4 Channel 6000 Watts Bridgeable Mosfet Amplifier Feature

• Maximum Power Output 4 x 1500W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB
• Bridgeable RMS Power @ 4 Ohms: 2 x 3000 W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection - Dimensions:9.76'' W x 2.99'' H x 16.93'' L
• 4 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms
• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off
• Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry

When power isn’t enough, you need Pyle Super Power. This four-channel, 6000-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Super Power.

Dual XPA2100 300 Watt 2-Channel Car Audio Amplifier

Dual XPA2100 300 Watt 2-Channel Car Audio Amplifier Review

Dual XPA2100 300 Watt 2-Channel Car Audio Amplifier Feature

• Hi/Lo Inputs
• Variable Low Pass/High Pass Crossovers
• Variable Bass Boost
• Extruded aluminum heatsink

The two-channel Dual XPA2100 MOSFET amplifier provides no-holds-barred mobile audio output with 300 watts of dynamic power output (4 ohms, bridged). This stylish red-and-black amplifier features a PWM MOSFET power supply and an extruded aluminum heatsink for stable operation. It offers 50 watts of RMS power per channel at 4 ohms and 75 watts per channel at 2 ohms. It can be configured for stereo/bridged simultaneous operation, and it includes auto-reset thermal overload protection as well as speaker short circuit protection--ensuring years of consistent, trouble-free operation. Other features include:

• Selectable crossover (high pass/low pass/full range)
• Variable high pass crossover
• Variable low pass crossover
• Variable crossover
• 12dB/Octave crossover slope
• 12dB Variable bass boost
• 2 Ohm stable stereo operation
• Class AB output design
• Stereo/bridged simultaneous operation
• Bridgeable operation
• Extruded aluminum heatsink
• Barrier strip connection terminals
• Side mounted controls
• Auto-reset thermal overload protection
• Speaker short circuit protection
• Reverse polarity protection
• Bi-color LED status indicator

300W 2-Channel Bridgeable Amplifier

Rockford Fosgate Prime R1000-1D 1,000-Watt Mono Amplifier

Rockford Fosgate Prime R1000-1D 1,000-Watt Mono Amplifier Review

Rockford Fosgate Prime R1000-1D 1,000-Watt Mono Amplifier Feature

• Class D mono amplifier delivers 1000 watts at 2 ohms, 500 watts at 4 ohms
• Variable low pass crossover with 12dB/octave slope and 40Hz to 130Hz crossover point
• Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz
• RCA inputs for signal level input and pass-through jacks for system building
• The input gain control is preset to match the output of most source units

The PRIME R1000-1D is a Class-D amplifier producing unreal power with unmatched efficiency. You simply cannot get a Kilowatt of power from a chassis this small using traditional Class-A/B amplifier designs. The Class-D topology inside the R1000-1D allows the amplifier to produce that much power with an amazing 90% efficiency! The 2-Ohm load mono stability is perfect for four 4-Ohm DVC subwoofers, or you can create your own car-shaking eight woofer system with 2-Ohm DVC subwoofers.

Rockford Fosgate Prime Series Amplification A new generation of performance geared toward the "novice" car audio enthusiast or first time buyer. The Prime series amplifiers feature legendary Rockford Fosgate power, controls, and functions while fitting into any budget. Now more than ever, it's easy to get Rockford Fosgate amplifier DNA into your car audio system.

---

Rockford Fosgate amplification at an unbelievable value. Click to enlarge.

R1000-1D Features

Class-D Topology
High efficiency amplifier design that reduces current consumption from the charging system.

Power and Protect LEDs
The Protect LED illuminates if a short circuit or to low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.

RCA Input Jacks
The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist the signal degradation caused by corrosion.

RCA Pass-Thru Jacks
This Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location.

Gain Control
The input gain control is preset to match the output of most source units.

Phase Switch
Allows you to select the output phase of the amplifier between 0 degrees and 180 degrees.

Variable Low Pass Crossover
Determine which frequencies you feed your subs with the built-in 12dB/octave Butterworth filter, with a crossover point variable from 40Hz to 130Hz.

Punch Bass
This is an adjustable Bass level control centered at 45Hz @ 12dB/octave.

Remote Punch Level Control
When connected, the "Gain Control" is linked and allows you to remotely control the output level of the amplifier from the dash or center console.

---

R1000-1D Specifications

Number of Channels:	1
Rated Power:	500 Watts RMS x 1 @ 4-Ohms 1000 Watts RMS x 1 @ 2-Ohms
Total Power:	1000 Watts
Dynamic Power:	1029 Watts
Bridgeable:	No
Efficiency (average):	90% @ 4-Ohm 89% @ 2-Ohm
Crossover Controls:	Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Tone Controls:	Punch Bass: 0dB to +12dB @ 45Hz
Signal Input:	Low Level: 1 RCA pair
Signal Output:	Low Level: 1 RCA pair
Power Input Connector:	Screw terminal barrier strip
Power Wire Gauge:	4 AWG
Speaker Output Connector:	Screw terminal barrier strip
Speaker Wire Gauge:	8 AWG
Heat Sink Type:	Extruded aluminum
Cooling:	Convection
Remote Controls:	Punch Level Control (when connected, is linked to "gain control" to provide remote output level)
Visual Indicators:	Power Protect
Circuit Topology Class:	Class D
Frequency Response:	20Hz to 130Hz +/-1dB
Shipping Weight:	TBA
Dimensions (HxWxL):	2.40 x 7.67 x 11.54 (in) 6.10 x 19.49 x 29.30 (cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1000-1D 500 Watt Mono Amplifier, User's Manual

---

Need More Amp?

Step up to the Punch Series P1000-1BD or the Power Series T1000-1BDCP for more advanced mono amps, or check out the many other Rockford options.

---

Rockford Fosgate Prime Series Amplification

Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier	Rockford Fosgate Prime R300-4 300 Watt Multi Channel Amplifier	Rockford Fosgate Prime R250-1 250 Watt Mono Amplifier	Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier	Rockford Fosgate Prime R1000-1D 1000 Watt Mono Amplifier

Rockford Fosgate Prime 1000 Watt Mono Class D amplifer with on-board adjustable crossover, gain control. Amplifier features unregulated power supply, and and remote Punch bass level control. CEA Certified RMS Power Rating 500 watts x1 @ 4 Ohms, 1000 watts x1 @ 2 Ohms. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Nitro Bmw-x43 300 Watt 4 Channel Car Amplifier

Nitro Bmw-x43 300 Watt 4 Channel Car Amplifier Review

Nitro Bmw-x43 300 Watt 4 Channel Car Amplifier Feature

• 300 watt 4 channel car amp
• 45 x 4 @ 2 ohms RMS
• Dual gain controls
• Plug In Harness
• Built in double sided PCB

BRAND NEW NITRO BMW-X43 300 WATT 4 CHANNEL CAR AMPLIFIER Features: 300 watt 4 channel car amp 45 x 4 @ 2 ohms RMS Dual gain controls Plug In Harness Very Low THD (low distortion) Low heat emmission stops amp from over heating LED Power indicator Remote turn on/off

MTX Audio TN250-1 Class D Mono Amplifier 400-Watt Peak

MTX Audio TN250-1 Class D Mono Amplifier 400-Watt Peak Review

MTX Audio TN250-1 Class D Mono Amplifier 400-Watt Peak Feature

• Max power output: 400 watts x 1 channel
• LED power and protection indicators
• Mono gain control
• Smart engage auto turn-on circuitry
• Built-in adaptive cooling fans

MISSION COMPLETE: Terminator amplifiers have a reputation for power and their objective is to deliver high quality sound and performance at prices anyone would be foolish not to take advantage of. POWER OF TECHNOLOGY: Terminator amplifiers have been totally redesigned to incorporate high quality aesthetics with the latest technologies that allow Terminator amplifiers to run as long as you do. All three models have a high sheen, gloss black cover that adds a powerful feel to any installation. All three models share the same size and footprint and all the connections are on one side making it easy to create a custom looking, clean installation. Rather than weighing you down with heavy aluminum heat sinks, Terminator amplifiers are cooled using a variable speed internal fan that is normally reserved for our highest end amplifier lines. As you turn your volume knob clockwise until you can't take it anymore, the amplifier output is increasing which engages the fan to automatically increase its speed allowing more cool air to enter the amp. This keeps the amplifier performing at its peak level longer and prevents the amplifier from having to go into thermal shutdown due to overheating. As you turn your system down to hear what your friends are saying about your system after you see them bobbing their heads to the beat and grinning from ear to ear from the back seat, the fan automatically slows down as the volume decreases. Talk about technology making life better. What's better than an affordable amplifier packed full of performance and these features?

Polk Audio PA D4000.4 4-Channel Class D PA Series Car Audio Amplifier 800W RMS PAD4000.4

Polk Audio PA D4000.4 4-Channel Class D PA Series Car Audio Amplifier 800W RMS PAD4000.4 Review

Polk Audio PA D4000.4 4-Channel Class D PA Series Car Audio Amplifier 800W RMS PAD4000.4 Feature

• PA Series 4-Channel Class D Car Amplifier
• RMS Power Rating: 4 ohms: 125 watts x 4 chan. | 2 ohms: 200 watts x 4 chan. | Bridged, 4 ohms: 400 watts x 2 chan.
• High-speed MOSFET power supply
• LED power (green) and protect (red) indicators
• Dimensions: 10-13/16"L x 6-3/4"W x 1-13/16"H

The PA D4000.4 is Polk Audio's new high-efficient digital 4-channel amplifier. This amplifier is perfect for providing the correct amount of power to a complete four speaker upgrade to your car audio system. The ability to bridge channels will give you more options on amplifying other applications such as subwoofers. This 4-channel can do amplify anything from high-end speakers to 4 entry level subwoofers.

Pyle PLA2378 2-Channel 2,000-Watt Bridgeable Mosfet Amplifier

Pyle PLA2378 2-Channel 2,000-Watt Bridgeable Mosfet Amplifier Review

Pyle PLA2378 2-Channel 2,000-Watt Bridgeable Mosfet Amplifier Feature

• Maximum Power Output 2 x 1000W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB
• Bridgeable RMS Power @ 4 Ohms: 1x2000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection -
• 2 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms
• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off
• Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry
• Dimensions:10.24" W x 2.21" H x 11.02" L

When power isn’t enough, you need Pyle Power. This two-channel, 200-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Power.

Sound Storm Laboratories EV4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover

Sound Storm Laboratories EV4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover Review

Sound Storm Laboratories EV4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover Feature

• Low pass crossover on CH3/4: 120Hz (fixed)
• Variable input gain control
• Power and protection LED indicators
• Line and speaker level inputs
• Chrome plated RCA connectors and screw terminals
• Max power 2 ohm 100W X 4
• RMS power 4 ohm 50W X 4

Charles Darwin generated a lot of controversy with his theory of evolution. Although his theories were well respected in the scientific community, they met with opposition from some in the general public. Sound Storm Laboratories' EVOLUTION is a series of stylish, efficient, high performing amplifiers that are as exciting and well respected as Darwin's theory, but without all of the controversy. SSL EVOLUTION is loved by scientists and non-scientists alike. The efficient power output of the SSL EVOLUTION IC amplifiers makes them a natural selection for those wanting a clean sound. EVOLUTION IC amplifiers allow the user to power a combination of tweeters, full range speakers and subwoofers in order to tune their vehicle's sound system to their exact preference specifications. The two ohm stable EV4.400 provides 400 watts of peak power. It comes standard with a fixed low pass crossover (120Hz), variable input gain control, power and protection LED indicators, and line and speaker level inputs. EVOLUTION IC amplifiers also feature chrome plated RCA connectors and screw terminals and a small footprint that allows the user to employ them in tight spots. Frequency response is 12Hz to 22kHz (+/-3dB). For technical questions about this product please visit our website, soundstormlab.com, or call a technician at 888.38.STORM. Let us prove to you that when it comes to building an impressive and affordable home-quality theater in your vehicle, Sound Storm is your mobile entertainment solution…and everything else is just noise.

MB Quart ONX4.80 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS

MB Quart ONX4.80 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS Review

MB Quart ONX4.80 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS Feature

• 4 x 80 Watt A/B Stereo Amp
• Exquistie Onyx heat sink desing
• Variable Low Pass, High Pass, Band pass
• Illuminated MB Quart logo
• System Diagnostics

MB Quart 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS

Pyramid PB715X 1000 Watts 2 Channel Bridgeable Car Amplifier

Pyramid PB715X 1000 Watts 2 Channel Bridgeable Car Amplifier Review

Pyramid PB715X 1000 Watts 2 Channel Bridgeable Car Amplifier Feature

• Receiver has BD - DVD - CD player and FM Tuner
• Connections - HDMI Out - 1; Video Out - 1; Digital Input - 2 (optical); Audio Input - 1 AUX (Stereo Mini Jack, 3.5mm)
• Speaker System - Front Configuration - 2-way 3-speaker, Bass-reflex Woofer - 1-3/8 x 4 Cone Type x2
• Pure Direct Sound Speaker - Yes (front, center)
• Advanced Bamboo Cone - Yes (front, center) Approximate Dimensions -

Two Channel idgeable Amplification Tri-way Configuration:1/2 Channels 2 X 500 Watts Total Output @ 4 Ohms 1000 Watts Total System Output @ 4 Ohms Variable Gain Control MOSFET Pulse Width Modulated Power Supply 2 Ohm Stereo Stable Built-In Variable Subwoofer Crossover High Level Low Impedance MOLEX Input Connector RCA Low Level Inputs Speaker Output Terminal Strip Signal/Noise Ratio 90dB THD Less Than 0.04% Frequency Response:15Hz-30kHz Overload Protection Thermal Protection Short Circuit Protection Power On LED Indicator LED Diagnostic Condition Indicator Automotive Type Fuse Protection Dimensions: 7.28-Inch L 9.45'W 2.09-Inch H

Pyramid PB417X 1000 Watt 4 Channel Bridgeable Mosfet Amplifier

Pyramid PB417X 1000 Watt 4 Channel Bridgeable Mosfet Amplifier Review

Pyramid PB417X 1000 Watt 4 Channel Bridgeable Mosfet Amplifier Feature

• Four Channel Bridgeable Amplification
• Tri-way Configuration:4/3/2 Channels
• 4 x 35Watts Total Output 4 Ohms
• 1000 Watts Total System Output 4 Ohms
• Variable Gain Control

Four Channel idgeable AmplificationTri-way Configuration:4/3/2 Channels 4 x 35Watts Total Output @ 4 Ohms 1000 Watts Total System Output @ 4 Ohms Variable Gain Control MOSFET Pulse Width Modulated Power Supply 2 Ohm Stereo Stable Built-In Variable Subwoofer Crossover High Level Low Impedance MOLEX Input Connector RCA Low Level Inputs Speaker Output Terminal Strip Signal/Noise Ratio: 90dB THD Less Than 0.04% Frequency Response: 15-30kHz Overload Protection Thermal Protection Short Circuit Protection Power On LED Indicator LED Diagnostic Condition Indicator Automotive Type Fuse Protection Dimensions: 9.84-Inch L 10.03-Inch W 1.96-Inch H

Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit

Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit Review

Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit Feature

• 8 gauge amplifier installation kit
• Competition high-quality fuse holder
• Ring terminals: #10, 0.25-inch, 0.31-inch
• Twenty 4-inch wire ties
• Many feet of wire and cable: red power, black ground, blue turn-on, speaker wire
• 20 Ft. 8 ga red power cable Competition high-quality fuse folder 3 Ft
• 8 ga. black ground cable 16 Ft. 18 ga blue turn-on wire 20 Ft
• high performance RCA (TRCA) interconnect 30 Ft. speaker wire 6 Ft. split loom tubing

8 Gauge amplifier installation kit includes:

Pyramid PB618 2000 Watt 4 Channel Bridgeable Mosfet Amplifier

Pyramid PB618 2000 Watt 4 Channel Bridgeable Mosfet Amplifier Review

Pyramid PB618 2000 Watt 4 Channel Bridgeable Mosfet Amplifier Feature

• Four Channel Amplification - Dual Variable Bass Boost (0-12DB@50Hz) - Variable Gain Control - High Level Molex Input - Fully Protected Circuitry
• 4×500W Max Output - Soft Turn On/Off Circuit - Remote Turn On - Power and Protection LED's - Dimensions: 10.24''W × 2.26''H × 13.78''L
• 2×1000W Watts 2 Bridged - 2 Ohm Stereo Stable - Heavy Duty Aluminum Alloy Heat-sink - S/N Ratio: >95DB
• 500 Watts × 2 Front + 1000 Watts × 1 Rear - Bridgeable into 4 Ohms - Hi/Low Level Inputs - Frequency Response: 15Hz-30KHz
• Dual Fully Adjustable Electronic Crossovers - Dual Mosfet PWM Power Supplies - High Impedance Input - THD<0.04%

This 4-channel Pyramid America amp is all you need to blast your music to new levels of American excess. No one does booming, ear-thrashing bass and sweet, mind-tweaking highs like Americans, so take your sound to the next level with this amp. It provides up to 500 watts of pure patriotic power – or bridge this amp to one channel and push it to 1000 watts! And you don’t need to worry about overheating – the entire thing is a heatsink. It’s equipped with a fully adjustable electronic crossovers for a multi-speaker setup, variable bass boost and gain control. Power and protection LEDs assure you your equipment is safe. Takes both high and low level inputs. THD < 0.04%.

MTX TNP212D2 Dual 12" Subwoofer And Amplifier

MTX TNP212D2 Dual 12" Subwoofer And Amplifier Review

MTX TNP212D2 Dual 12" Subwoofer And Amplifier Feature

• Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier
• TNA251 amplifier delivers 250 watts x 1 at 2 ohms; 150 watts x 1 at 4 ohms
• Variable low- and high-pass filters offer 40Hz-400Hz range for sound shaping
• TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power
• Enclosure boasts 5/8" MDF construction, aviation-grade black carpet, and embroidered Terminator logo

Here's an enclosure/amplifier combo from MTX for those looking to add some serious subwoofer to their mobile system. This package combines a two-subwoofer enclosure and mono block amplifier, specifically matched to deliver nothing but pure low-end.

Add some chest-pounding low-end to your mobile system. Click to enlarge.

TNA251 amplifier with fan cooling, slim profile, and convenient connections.

A pair of Terminator subs deliver rock-solid performance at an affordable price.

A Complete Amplified Bass System

This Terminator amplified bass system provides all the power you need for a chest-pounding audio experience. Combining the sleek looks and power of a Terminator mono block amplifier with a sealed enclosure housing two 12-inch Terminator subwoofers, it's an ideal solutions for anyone looking to add bass to their vehicle.

TNA251 Amplifier

Terminator amplifiers have a reputation for power, delivering high-quality sound and performance at affordable prices. The TNA251 features a high-sheen, glossy black cover for looks to match the power. All connections are on one side, making it easy to create a custom-looking, clean installation. Rather than weighing you down with heavy aluminum heat sinks, Terminator amplifiers are cooled using a variable speed internal fan. While you crank the volume, the amplifier output increases, which engages the fan for more cool air. This keeps the amplifier performing at its peak level longer and prevents the amplifier from having to go into thermal shutdown due to overheating.

TNA251 Specs

• RMS power (watts): 150 watts x 1 @ 4 Ohms
• Signal-to-noise ratio (1 W): 80 dB
• RMS power (watts): 250 watts x 1 @ 2 Ohms
• Frequency response (+/- 1 dB): 20 to 30 kHz
• THD+N (1 W): Greater than or equal to 1%
• Maximum input signal: 6V
• High-pass filter: variable, 40 to 400 Hz
• Low-pass filter: variable, 40 to 400 Hz

Terminator TNP212D2 Enclosure

The Terminator enclosures are ruggedly constructed using 5/8-inch MDF and aviation-grade black carpet with an embroidered Terminator logo. The Terminator subwoofers are capable of handling 200 watts RMS each, with solid, dependable construction--rock-solid performance at an unbeatable price.

TNE212D2 Specs

• Description: Dual 12-inch, Terminator-loaded sealed enclosure
• Impedance: 2 ohms
• Frequency response (+/- 3 dB): 41 to 150 Hz
• RMS power (watts): 400
• Recommended amp power (RMS): 200 to 400 watts
• MAX power: 1200 watts
• Recommended amp power (MAX): 400 to 1200 watts
• Enclosure size: 29.625 x 15 x 13.875

What's in the Box

TNP212D2 Subwoofer Enclosure, TNA251 Mono Block Amplifier, cables/installation hardware, remote bass control, and user's manual.

MTX created the Terminator series amplified sub system with one thing in mind: to terminate the competition who make inferior quality loaded woofer systems. They did a great job with this system as they thoroughly tested their TN250/1 Class D monoblock amplifier with the two Terminator 12" subwoofers and matched them in the perfect enclosure. Because they built the enclosure to perfect specifications for the subs and amp combo, they allow you to leave your fear of a bad system at the door and instead enjoy hours of clean, loud bass at an unbeatable price. TNE212D Dual Loaded Subwoofer Enclosure Features: 2 12" Terminator Series Subwoofers Included Power Handling: Peak: 1200 watts per pair / 600 watts each sub RMS: 400 watts per pair / 200 watts each sub 2" Aluminum single 4 ohms voice coil Rubber Surround Polypropylene Cone MTX Audio Logo on Dustcap 48oz. Magnet Frequency response: 37-150 Hz Enclosure Features: Dual 12" Sealed Sub Enclosure 5/8" MDF Solid Contruction Durable Black Carpeting Terminator Logo Embroidered into Carpet Front Dimensions: 14"H x 29-1/2"W x 13-1/2"D1 x 11"D2 TN250/1 Monoblock Amplifier Features: Terminator Series Class D Monoblock Car Amplifier RMS Power Rating: 2 ohms: 200 watts x 1 chan. Max power output: 400 watts x 1 chan. LED power and protection indicators Selectable bass boost (0, 6, 12 dB at 40 Hz) Mono gain control Smart engage auto turn-on circuitry Built-in adaptive cooling fans Fixed low-pass filter (85 Hz, 18 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-85 Hz Dimensions: 13-1/16"L x 10-3/16"W x 2-1/4"H 4-gauge power and ground leads recommended.